C:\phantom> cat /gear/elura-amp50-3-arc-3ch-amplifier-with-arc-50w-for.txt_

Elura · Audio & Speakers
Elura AMP50/3-ARC 3-Channel 75-Watt Amplifier with ARC
$899.99
- SKU
- 187272
- MPN
- AMP50/3-ARC
Terms and Conditions3-year warranty on all these products that I deliver and install. It covers defects in the product itself — not damage from weather, power surges, accidents, or misuse.
> overview
The Elura AMP50.3-ARC is a versatile 3-channel amplifier designed to deliver high-quality sound for home audio and entertainment systems. With 50W per channel (left & right) 75W Center and ARC (Audio Return Channel) support, this amplifier seamlessly integrates with modern TVs and audio setups, providing enhanced clarity and immersive sound.
> features
- ▸3 Channel (LCR) Amplifier
- ▸50 Watts Left & Right at 8 ohm
- ▸75 Watts Center at 8 ohm
- ▸Small Size, Lightweight
- ▸Short Circuit & Thermal Protection
- ▸HDMI Input with ARC (Audio Return Channel)
- ▸Variable Center Channel Output
- ▸Analog RCA Inputs
- ▸Optical Input
- ▸Wireless Audio Connectivity
- ▸Variable Sub Output
- ▸Auto On
- ▸Trigger On
- ▸Front Panel LED’s Indicate Mode & Remote Learning Confirmation
- ▸Handheld Remote Included
- ▸TV Remote IR Learning Capability
- ▸Extendable IR Receiver Included
- ▸Brackets for Vertical Wall/Cabinet Mounting Included
- ▸Outboard Power Supply and Mounting Bracket Included (AC110 – 230V Input to 28VDC Output) View More
> specifications
- Amplifier Specifications
- Model
- AMP50/3-ARC
- Product Type
- 3-Channel LCR Amplifier with ARC
- Number of Channels
- 3 channels: Left, Center and Right
- Power Rating per Channel
- 50W Left and Right / 75W center at 8Ω 75W Left and Right / 80W Center at 4Ω
- Frequency Response
- 20Hz-20kHz
- Total Harmonic Distortion (THD+N)
- ≤0.5%
- Input Sensitivity
- 730mV Left and Right; 560mV Center through AUX IN
- Input Impedance
- 10kΩ
- Signal-to-Noise Ratio
- ≥86dB
- Subwoofer Output Level
- Variable, 2V maximum
- Subwoofer Output Frequency Response
- 20Hz-100Hz; -3dB at 130Hz with 12dB/octave roll-off
- Protection
- Short-circuit and thermal protection
- Auto-On Sensitivity
- 4mV
- Auto-Off Delay
- Approximately 30 minutes
- Wireless Audio Receiving Range
- >10m
- Wireless Audio Pairing Name
- AMP50/3-ARC
- HDMI
- Supports ARC and eARC
- Safety Certification
- FCC
- Power Requirement
- 28VDC, 7.1A
- Chassis Dimensions (W × D × H)
- 203 × 132 × 36mm (7.992" × 5.197" × 1.417") 233mm (9.173") wide with mounting brackets attached 38.8mm (1.527") high with rubber feet
- Net Weight
- 0.97kg (2.14lb)
- Inputs and Outputs
- HDMI Input
- 1 × HDMI ARC/eARC input
- Analog Audio Input
- 1 × stereo RCA AUX input
- Optical Audio Input
- 1 × Toslink digital optical input
- Wireless Audio Input
- Supported
- IR Input
- 1 × 3.5mm TRS input for supplied IR receiver
- Trigger Input
- 5-12VDC, positive tip
- Subwoofer Output
- 1 × variable RCA line-level output
- Speaker Outputs
- 6-position Phoenix-style connector for Left, Center and Right speakers
- Center Channel Gain
- Adjustable from 0dB to +6dB
- Operating Modes and Controls
- Default Input Selection
- D1 Up / D2 Up: Wireless Audio D1 Up / D2 Down: ARC D1 Down / D2 Up: Optical D1 Down / D2 Down: AUX
- Volume Mode
- D3 Up: variable volume; D3 Down: fixed volume
- Auto-On Mode
- D4 Up: automatic signal sensing; D4 Down: manual remote power control
- IR Learning Mode
- D5 Up: Run; D5 Down: Learn
- Learnable IR Commands
- Power On/Off, Mute, Volume Down and Volume Up
- Remote EQ Controls
- Bass and treble boost, cut and flat; ±6dB
- Front-Panel LED Modes
- Wireless Audio: left LED blue ARC: right LED yellow Optical: left LED purple AUX: right LED green Standby: left LED red
- IR Receiver Specifications
- Receiving Distance
- Up to 10m
- Angle of Acceptance
- ±45° from center line
- Operating Voltage
- 2.7-5.5VDC
- Plug Configuration
- Tip: VCC; Ring: IR signal; Sleeve: ground
- IR Receiver Dimensions
- 16.7 × 29.5mm (0.657" × 1.16")
- Cable Length
- 1.5m (4.9ft)
- Remote Control Specifications
- Button Functions
- Power, Mute, Wireless Audio, ARC, Optical, AUX, Volume Up/Down, Bass Up/Down/Flat and Treble Up/Down/Flat
- IR Transmit Distance
- Up to 10m
- Battery
- CR2025
- Dimensions (H × W × D)
- 86 × 41 × 7mm (3.38" × 1.61" × 0.276")
- Power Supply Specifications
- Input Voltage
- 110-230VAC, 50/60Hz, 3.0A
- Output Voltage
- 28VDC, 7.1A
- Protection
- Over-current and short-circuit protection
- Energy Efficiency
- Level VI
- Safety Certifications
- cULus, FCC, CE and UKCA
- AC Cable
- Removable 3-prong grounded cable, 1.5m (4.9ft)
- DC Cable
- Hardwired 2-conductor cable with 5.5mm DC connector, 1.5m (4.9ft)
- Power Supply Dimensions (L × W × D)
- 152.4 × 65.4 × 35mm (6" × 2.57" × 1.38")
- Power Supply Net Weight
- 0.55kg (1.2lb)
- Mounting Bracket Dimensions (L × W × D)
- 90 × 69 × 39.5mm (3.54" × 2.72" × 1.55")
- Package Contents
- Included Components
- 1 × AMP50/3-ARC amplifier 1 × Power supply 1 × Power supply mounting bracket, safety strap and screws 1 × IR receiver with mounting adhesive 2 × Amplifier mounting brackets 1 × Handheld remote control with battery 1 × User manual
- Warranty
- Limited Warranty
- 2 years from the date of purchase
> installation
Want this installed? Every installation estimate is free.
